• 0Shopping Cart
Insulation Concepts
  • Home
  • Services
    • New Builds
    • Retro-Fit
  • Shop
  • About us
  • Contact
  • Login
  • Search
  • Menu

Brownie Wall Insulation

BROWNIE Wall Slab is designed specifically for press and fit installation without any need for stapling or fastening. It resists vibration or shake down and fits readily around uneven surfaces. Once installed, the BROWNIE Slab acts as a highly effective barrier to heat flow, keeping your building warm during cold weather and cool during hot weather. It combines cost efficiency with the highest standard of insulation performance when installed in accordance to either timber or steel frame wall applications.

BROWNIE Slab range encompasses multiple densities, thicknesses and dimensions to suit typical timber and steel framed studs and to satisfy a broad spectrum of building requirements. BROWNIE Wall Slab reduces noise entering the home when installed in the external walls and reduces noise transfer between rooms when installed in the internal walls. The rigidity of BROWNIE Wall Slab assures users the product will not sag within the cavity.

An environmentally friendly range of glass mineral wool insulation with no-added formaldehyde utilizes an innovative bio-based binder that eliminates binder-related formaldehyde emissions during manufacturing and once installed.

Category: Brownie Wall Insulation
  • Description
  • Reviews (0)

Description

Brownie Wall Insulation

Advantages

Optimal fibre diameter
Better fibre network
Less dusty and less itchy
Low ‘K’ factor
Excellent acoustic properties
Does not encourage mould growth
Absorbs disturbing sound
Non-corrosive

Performance

THERMAL PERFORMANCE
Appraised and complies with AS/NZS 4859.1 at 15°C mean temperature.

ACOUSTICAL PERFORMANCE
Type ‘A’ Mounting, tested in accordance with ASTM C 423.

FIRE PROPERTIES

Tested in accordance and complies with (plain/unfaced):
B.S. 476: Part 4 Non-combustibility test for materials
B.S. 476: Part 6 Fire propagation
B.S. 476: Part 7 Surface spread of flame
ASTM E84

BROWNIE SLAB products have been evaluated through the CodeMark process. When used, installed and maintained in accordance with the requirements outlined in this datasheet, will meet or contribute to meeting the following provisions of the NZBC:

Clause B2 – DURABILITY
– Performance B2.3.1 (a) The life of the building, being not less than 50 years
Clause C3 – FIRE AFFECTING AREAS BEYOND THE FIRE SOURCE
– Performance C3.7 (a) be constructed from materials which are not combustible building materials
Clause E3 – INTERNAL MOISTURE
– Performance E3.3.1
Clause F2 – HAZARDOUS BUILDING MATERIALS
– Performance F2.3.1.
Clause H1 ENERGY EFFICIENCY
– Performance H1.3.1 (a) and H1.3.2 E.

BROWNIE Slab is safe to use due to the low VOC content. Tested in accordance with ASTM D 5116.

*Order in-store or send an inquiry.

Reviews

There are no reviews yet.

Be the first to review “Brownie Wall Insulation” Cancel reply

Your email address will not be published. Required fields are marked *

Interesting Insulation Facts

The earliest form of insulation was during the Middle Ages, when the walls of homes were stuffed with mud and straw to keep out the cold.

In the mid-1970s, home improvement companies traded asbestos insulation for fiberglass insulation after finding out the harmful effects asbestos has on lungs.

Fiberglass was invented when a young researcher named Dale Kleist attempted to create a vacuum-tight seal between two pieces of glass and a high-pressure jet of air shot through and turned them into fibers.

Today, an un-insulated home can lose up to 60% of its energy through walls and the ceiling.

Insulation is measured using an “R-value,” which refers to its resistance to heat flow. The higher the R-value, the better it will insulate.

Follow us on Facebook

Insulation Concepts

260D Port Hills Road
Hillsborough
Christchurch 8022

© 2018 - Insulation Concepts. All rights reserved
Brownie Ceiling Insulation Tape It – PVC joining tape
Scroll to top